Raail AirWrap DIY Kit - Peel-able Automotive Paint
- Turbine and Compressor Application
- Fast color coverage
- Self-leveling properties
- Spray on and peel off
- Finish: Satin
- DIY Friendly
AirWrap Kits Include
Primer/Black > Tinted Midcoat/PB&J Colorshift
Small: 2 Black AirWrap Primer Gallons and 2 Pb&J Colorshift AirWrap Midcoat Tinted Gallons
Medium: 2 Black AirWrap Primer Gallons and 3 Pb&J Colorshift AirWrap Midcoat Tinted Gallons
Large: 3 Black AirWrap Primer Gallons and 3 Pb&J Colorshift AirWrap Midcoat Tinted Gallons
XL: 3 Black AirWrap Primer Gallons and 4 Pb&J Colorshift AirWrap Midcoat Tinted Gallons
Getting ready to spray
We suggest doing a test panel prior to spraying full scale. This is to ensure your gun setting, speed and distance along with color are set. To read a more in depth how to, click here.
Apply 2-3 tack coats of AirWrap Primer. 10 Min in between coats. Medium coats there after.
Apply Primer coats as suggested per correct vehicle kit size. Suggested to use the entire gallon. Spraying panel by panel is fine here.
Apply the Midcoat. This is your tinted gallons. These can be pearls, tints or flakes. Best to apply full passes vs panel by panel.
Allow 2 hours to cure before unmasking.
Q: Can I spray Raail AirWrap with a turbine?
A: Yes. No issues there. AirWrap is great with a turbine or a compressor.
Q: Do I need a paint booth?
A: A paint booth is not required however, having a clean work space helps prevent dirt/trash from landing on the surface.
Q: My vehicle is the same color are the Primer. Do I still need to apply the Primer?
A: Yes, this will ensure durability and prevent any unwanted peeling. Also if you are using pearls, you will always need to spray a base before spraying pearls. You would never spray Clear Midcoat + Pearls over your OEM paint.
Always do a test panel.